How to fix E4, E5, and E6 Error in HP printer

The printer is one of the important computer equipment. One of the functions of the printer is to print all forms of files from a computer or laptop, even gadgets that allow it. Almost all institutions and homes have this tool. Printers are divided into three types, namely laserjet printers, inkjet printers, and dot matrix. In each type, the printer continues to develop. In terms of physical design and technology. Even now many printers are produced without cables in their use. In this case, make sure we do not rush to reset the printer. First, identify the error that has occurred with the device to take appropriate action. On this occasion, I will share how to fix errors E4, E5, and E6 on HP printers. Frequent errors that occur on HP printers might irritate us, especially if the work to be done is still piling up. For those of you who experience the printer error E4, E5, or E6, please follow the steps to resolve the error:

How to fix E4, E5, and E6 Error in HP printer

How to fix E4, E5, and E6 Error

Note: These errors are common to appear in HP Deskjet, ENVY, Ink Tank, and Smart tank series.

How to solve the E4, E5, and E6 error on the HP printer

Read Also: How to fix E1, E2, and E3 Error


if you encounter a case of an HP printer having an E4 error, all the indicators turn on and flash alternately, this is caused by a hard jam, all you need to do is clean the jammed paper then press the resume button to continue printing.

How To Fix E4 Error Code

Clear jams and then press the Resume button to continue printing.


Error E5 often occurs on HP printers and almost all indicators are lit or flashing, this is because the printer has detected an Error in the Scanner Section. The quick solution is to turn off the printer then restart the printer, repeat these steps, if still not successful you can check the scanner cable on the hinge, for easier you can take it to a repairman.

How To Fix E5 Error Code

turn off the power cable and turn on the printer again. If the problem persists, contact HP Customer service. The printer can still be used to print even though the printer scanner is not working.


In the case of E6 error on this HP printer, it is because the printer has a problem with an error in the entire system, this can be due to deadlights or a problem with the EEPROM software of the printer itself, to solve Error E6 on an HP printer, you can follow these steps:

How To Fix E6 Error Code

Reset printer.

  • Turn on the printer.
  • Then unplug the printer power cable.
  • Wait a moment, then plug the power cord back in.
  • Turn on the printer.

That’s a little tutorial on how to fix hp printer error E4, E5, and E6, hope it helps 🙂

2 comments for “How to fix E4, E5, and E6 Error in HP printer

Leave a Reply

Your email address will not be published. Required fields are marked *