HP LaserJet Pro MFP 3102fdw Driver for Windows and macOS

The HP LaserJet Pro MFP 3102fdw B/W laser multifunction devices with WiFi and fax. Printing is in duplex, but scanning is in simplex only. Automatic duplex printing is limited to A4 or US derivative formats. HP does not specify a possible grammage for this mode, but it should be more difficult from 105 g/m². The output tray with face-down storage holds up to 150 A4 prints – with envelopes it gets “cramped” after ten. At 33 ipm, the printing speed should be perfectly sufficient for most tasks but is noticeably reduced to 20 ipm in duplex mode – which then corresponds to ten double-sided printed A4 sheets per minute. The flatbed module offers a CIS sensor with 1,200 dpi and a scanning surface without indentations on the two front edges – adding originals is therefore particularly convenient since you don’t have to dig anything out of the (usually somewhat indented) flatbed. Multi-page scans can be done using the 50-sheet ADF, but generally only in simplex mode. The template must be rotated manually for the scan or a copy of the back. There is probably no assistance for this so in this case you have to think about the order. The scanning resolution is limited to 300 dpi via the ADF when using the Smart App. The device itself has a 6.8 cm color display with touch controls. The surface corresponds to what is known from almost all HP printers and scanners and thus enables a particularly short familiarization period with an HP fleet. The main memory is rated at 512 MB and cannot be expanded. The processor works at 800 MHz. The HP LaserJet Pro MFP 3102fdw understand PCL 5 and 6 drivers, Postscript driver and PDF Direct.

HP LaserJet Pro MFP 3102fdw driver for windows and macOS

HP LaserJet Pro MFP 3102fdw Driver

Check other LaserJet Series: HP LaserJet Pro MFP M428fdn Driver

HP LaserJet Pro MFP 3102fdw Driver for Windows and macOS

Refer to the operating systems compatibility to ensure the HP LaserJet Pro MFP 3102fdw printer is compatible with your PC or Mac to avoid an error when setup, installing the driver or using the printer.

HP LaserJet Pro MFP 3102fdw Driver and Software Compatibility

  • Windows Compatibility: Windows 7, Windows 8.1, Windows 10, and Windows 11
  • macOS Compatibility: macOS 14, macOS 13, macOS 12, macOS 11, macOS 10.15, macOS 10.14, macOS 10.13, macOS 10.12

Download HP LaserJet Pro MFP 3102fdw Drivers and Software

Windows Driver:
Install HP Smart from the Microsoft store to set up and use your HP printer directly from the app. or you can install the driver software below:

HP LaserJet Pro MFP 3102fdw Full Software and Driver Download
Filename: Full_Webpack-51.8.5837-SJ0001_Full_Webpack.exe

HP LaserJet Pro MFP 3102fdw Printer Basic Driver and Software Solution Download 32-bit | Download 64-bit
Filename: Basic_Webpack_x86-51.8.5837-SJ0001_Basicx86_Webpack.exe (32-bit) | Basic_Webpack_x64-51.8.5837-SJ0001_Basicx64_Webpack.exe (64-bit)

macOS Driver:
HP LaserJet Pro MFP 3102fdw Easy Start Pro for Mac Download
Filename: HP_Easy_Start_Pro.pkg

Disclaimer: All HP LaserJet Pro MFP 3102fdw drivers and manuals operated by HP Manual are copyrighted to HP Official or one of the HP official vendors.

Leave a Reply

Your email address will not be published. Required fields are marked *